服务中心   Service Center
沧州鹏宇铸造机械厂
地址:河北省献县城北开发区
崔  旭:18703376987
王淑英:13780574987
http://www.pyshexinji.com
首页 > 新闻咨讯 >   覆膜砂射芯机的芯盒的结垢与清洗

覆膜砂射芯机的芯盒的结垢与清洗

发布时间:2020-01-11
生产效率和经济效益比较Comparison of production efficiency and economic benefit使用液体喷砂机和玻璃丸清洗芯盒的工艺基本上能够将芯盒表面较厚的树脂结垢清理干净,但对于较长时间没有清洗积垢很厚的沟槽处,却难于清除干净。同时启动空气压缩系统,则对于长期积垢有较好效果,但成本相对高一些。所以,要针对不同情况选用不同清洗工艺。Process using liquid sandblasting machine and glass cleaning Pill Box basically can be the core box surface thick resin fouling clean, but for a long time without cleaning groove fouling very thick, but it is difficult to clean. At the same time to start the air compression system, it had a good effect on the long-term scale, but the cost is relatively high. Therefore, different cleaning processes should be selected for different conditions.覆膜砂射芯机的芯盒的结垢与清洗是我国许多企业多年来一直未能有效解决的难题。芯盒的结垢不仅造成铸造模具表面粗糙。严重影响砂芯的外观质量,导致铸件粘砂、尺寸精度降低、严重时则会造成铸件批量废品和铸造模具报废。The fouling and cleaning of the core box of the film mulching machine is a difficult problem for many enterprises in China for many years. The fouling of the core box not only causes the rough surface of the casting mold. The appearance quality of the sand core is seriously affected, which leads to the reduction of the casting, the reduction of the size accuracy, and the scrap of the castings and the scrap of the casting mould.
当前地址:http://www.pyshexinji.com/news/773/  作者:鹏宇射芯机
热门推荐